FOR PROFESSIONAL USE ONLY
SODIUM HYPOCHLORITE SOLUTION CONTAINING 10% AVAILABLE CHLORINE (when packed).
Use regularly for disinfecting and sterilisation of water bowsers and associated pipe work/fittings.
Directions for Use:
Drains: Use neat solution regularly for disinfection.
Bowsers: To sterilise, dilute 500ml of Sodium Hypochlorite to every 500 Litres of water and allow a minimum contact time of one hour prior to emptying ready for re-use.
Hose ends & outlet pipes: To sterilise, dilute 20ml of Sodium Hypochlorite to 9 Litres of water. Immerse for at least one hour prior to use.
DO NOT MIX SODIUM HYPOCHLORITE WITH ANY OTHER PRODUCTS ESPECIALLY ACIDS AS THIS WILL LIBERATE A TOXIC GAS.
Sodium Hypochlorite will bleach clothes if splashed.
Store upright in a cool dark place away from heat and direct sunlight. Apply strict stock rotation. For maximum effectiveness use within 26 weeks of delivery.
Danger: Causes severe skin burns and eye damage. May cause respiratory irritation. Very toxic to aquatic life. Toxic to aquatic life with long lasting effects. Contact with acids liberates toxic gas.
Avoid breathing mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Safety Data Sheet:
10% Sodium Hypochlorite Safety Data Sheet
Aqua, Chlorine based bleaching agents (Sodium Hypochlorite).